Forward Controls Design RE5F Vltor A5

RE5F is a 9 position receiver extension compatible with Vltor's splendid A5.  RE5F is a collaboration with SOLGW, and is identical to Sons of Liberty Gunworks Loyal 9 A5 RE save for the respective company logo/name engravings. Forward Controls had...

Forward Controls Design OPF- M.O.S. RMR

The Forward Control Design Optics Platform is a custom modification to your Glock pistol for the use of Trijicon RMR and SRO optics. These Glock compatible mounting plates are designed to fully support the optic in the front and rear with recoil...

Forward Controls Design ABC/R SERRATED (REAR BIASED)

ABC/R (Augmented Bolt Catch/Release) with its angled and larger top paddle and lower paddle with increased surface area, is purpose designed for use with AR15/M16 receivers equipped with ambidextrous magazine releases. Specifically, it is designed to...

FORWARD CONTROLS ADJUSTABLE TURRET CAP (T1/T2)

Forward Controls TGF Triggerguard (WINTER)

You may not think much about your trigger guard, but a quality trigger guard can enhance your rifle, both aesthetically and ergonomically. The winterized trigger guard is precision machined from durable 7075-T6 aluminum and features an extended design...

Forward Controls Design OPF- G43X/48 RMRcc

OPF-G43x/48, RMRcc (Optics Platform, Forward Controls, G43x/48, RMRcc) is the latest member of the OPF line. G43x and 48 MOS slides are designed for direct mounting of the Shield RMRcc sight. Trijicon's RMRcc is longer and requires an adapter plate...

SOLGW/FCD LRF AMBI LOWER

The LRF, an ambidextrous AR-15 lower receiver, sets new standards in design and functionality. Crafted from a solid block of 7075 aluminum, this receiver features a built-in right side bolt release, perfectly complementing our EMR-A (Enhanced Magazine...

Forward Controls Design Ar-15 End Plate W/ 3-Qd Sling Swivel Sockets Steel - End Plate W/ 3-Qd Sling Swivel Sockets Black Dlc

The Forward Controls Design ESF is a end plate replacement for the AR platform. Featuring three quick detach sling swivel sockets (two side, and one rear facing), when used in conjunction with a castle nut, ESF will allow retractable carbine stocks to...

Forward Controls EMR-H (Serrated)

FCD’s EMR-H is a mag release that increases the usable surface area while retaining the same footprint as a factory mag release. EMR achieves this by using a gentle curve on its top surface, together with the very effective horizontal serrations,...

Forward Controls ATA Comp M5

ATA, Comp M5 (Adjustable Turret cap, Aimpoint Comp M5)  is a simple and robust solution.  ATA, Comp M5 gives the user the ability to make adjustments to either the windage or elevation without removing the caps.  ATA, Comp M5consists...

Forward Controls Design CNF (Castle Nut)

The TDP spec castle nut is a simple and robust fastener that is almost perfect for the job it's tasked to perform. CNF (Castle Nut, Forward Controls) is based on the TDP spec castle nut, with now 4 staking notches that are longer and deeper (30...

Forward Controls ASF Safety (Semi Auto) (50 Degree)

ASF-50 is a short throw (rotate to 50 degrees for FIRE/SEMI) semi auto selector with q (offset) levers. ASF (Ambidextrous Selector, Forward Controls) and SOLGW’s The Quick is a joint project between FCD and SOLGW.  The two companies have...

Forward Controls Design - Ar-15 .750 Gas Block Steel

Description GBF (Gas Block Forward Controls) is a 0.750 gas journal gas block done FCD way: meticulously designed and machined, with thoughtful features throughout. Machined from heat treated 4140 bar stock, GBF is manganese phosphate...

Forward Controls Design Ar-15 ABC/R Dimpled (Rear Biased)

Product Details Details Manufacturer: Forward Controls DesignMaterial: 8620 SteelFinish: DLCColor: BlackPlatform: AR15/M16Upper Paddle Option: Rearward-Biased, Dimpled Features The Forward Controls Design...

Forward Controls Design Ar-15 Enhanced Magazine Release Button - Ar-15 Enhanced Magazine Release Button Dimpled Mil-Spec

The EMR-H features a slightly curved button surface to fit the natural curvature of your finger. The form fitting curve, along with horizontal serrations, create a self centering surface that inhibits the finger's vertical movements. The EMR-H has a...

Forward Controls Design OPF-P320, RMR, RSD

Forward Controls Design TGF Trigger Guard ((Straight/Standard)

TGF, BLK (Trigger Guard, Forward Controls) is machined from 7075 aluminum and hard coat Type III hard coat anodized, it does not have a spring loaded detent for the front, but use a set screw like Magpul's, and a standard trigger guard roll pin in the...

Forward Controls OPF-G, ACRO (Optics Platform, Forward Controls, Glock, ACRO)

ATTENTION, Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO.  Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats...

Forward Controls PCM-L (Panel, Cable Management, MLOK, Long)

Pressure switches, like them or not, have their place on a fighting rifle.  If you do have one for your WML or IR target designator/illuminator, you have no doubt resorted to zip ties, rubber bands, or electrical tape to manage and route the cable...

Forward Controls Design 6310KM-L 1/2x28

6315KM-L (long) is the Dead Air sound suppressor Keymo mount of our 6315 (1/2×28) flash suppressor designed for 13.9″ barrels, compatible with .223 Dead Air sound suppressors with Keymo interface. 6315KM-L is 2.7″ long, and can bring a...

Forward Controls Design 6310KM-L 5/8x24

6310KM is the Dead Air Keymo mount version of our 6310 flash suppressor, compatible with Dead Air .30cal sound suppressors with Keymo interface.   We are a big fan of the A2 flash suppressor / compensator (compensator is the Army TM...

Forward Controls Design Ar-15 6315 Flash Hider for Keymo Mount 1/2-28

Product Details Details Manufacturer: Forward Controls Design  Material: 4140 Steel Finish: QPQ coated Thread: 1/2x28 Length: 2.38” Weight: 3.97oz Drilled for Pinning: Yes Features The...

Forward Controls Design EMR-A Mag release (Dimpled) (STD Lever)

EMR-A is a long in development ambidextrous magazine release for .223 and .308 AR receivers.  The original concept and design were complete in 2015.  After numerous changes to the mag catch geometry and lever shapes, the final design was made...

Forward Controls Design EPC OD green Twin Dimple

EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches. Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features they think many will find useful.   EPC has two "tabs"...