Forward Controls EPC (Ejection Port Cover)

We had resisted making a Forward Controls version of ejection port cover, mainly because we were preoccupied with other projects, but when we had a moment to list the things we wanted on an FCD version, it wasn't long before it became a project we became...

Forward Controls Design RE5F Vltor A5

RE5F is a 9 position receiver extension compatible with Vltor's splendid A5.  RE5F is a collaboration with SOLGW, and is identical to Sons of Liberty Gunworks Loyal 9 A5 RE save for the respective company logo/name engravings. Forward Controls had...

FORWARD CONTROLS ADJUSTABLE TURRET CAP (T1/T2)

Forward Controls Design ABC/R SERRATED (REAR BIASED)

ABC/R (Augmented Bolt Catch/Release) with its angled and larger top paddle and lower paddle with increased surface area, is purpose designed for use with AR15/M16 receivers equipped with ambidextrous magazine releases. Specifically, it is designed to...

Forward Controls TGF Triggerguard (WINTER)

You may not think much about your trigger guard, but a quality trigger guard can enhance your rifle, both aesthetically and ergonomically. The winterized trigger guard is precision machined from durable 7075-T6 aluminum and features an extended design...

Forward Controls Design Ar-15 End Plate W/ 3-Qd Sling Swivel Sockets Steel - End Plate W/ 3-Qd Sling Swivel Sockets Black Dlc

The Forward Controls Design ESF is a end plate replacement for the AR platform. Featuring three quick detach sling swivel sockets (two side, and one rear facing), when used in conjunction with a castle nut, ESF will allow retractable carbine stocks to...

Forward Controls Design OPF- G43X/48 RMRcc

OPF-G43x/48, RMRcc (Optics Platform, Forward Controls, G43x/48, RMRcc) is the latest member of the OPF line. G43x and 48 MOS slides are designed for direct mounting of the Shield RMRcc sight. Trijicon's RMRcc is longer and requires an adapter plate...

Forward Controls EMR-H (Serrated)

FCD’s EMR-H is a mag release that increases the usable surface area while retaining the same footprint as a factory mag release. EMR achieves this by using a gentle curve on its top surface, together with the very effective horizontal serrations,...

Forward Controls Design CNF (Castle Nut)

The TDP spec castle nut is a simple and robust fastener that is almost perfect for the job it's tasked to perform. CNF (Castle Nut, Forward Controls) is based on the TDP spec castle nut, with now 4 staking notches that are longer and deeper (30...

Forward Controls ASF Safety (Semi Auto) (50 Degree)

ASF-50 is a short throw (rotate to 50 degrees for FIRE/SEMI) semi auto selector with q (offset) levers. ASF (Ambidextrous Selector, Forward Controls) and SOLGW’s The Quick is a joint project between FCD and SOLGW.  The two companies have...

Forward Controls Design OPF-P320, RMR, RSD

Machined in 4140 steel and melonite coated, OPF-P320, RMR, RSD is a new member of our OPF (Optics Platform, Forward Controls) line. OPF-P320, RMR, RSD is a drop in adapter for superb Trijicon RMR sights. OPF-P320, RMR is shipped with two 4-40x3/16 Allen...

Forward Controls OPF-G, ACRO (Optics Platform, Forward Controls, Glock, ACRO)

ATTENTION, Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO.  Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats...

Forward Controls Design Ar-15 ABC/R Dimpled (Rear Biased)

Product Details Details Manufacturer: Forward Controls DesignMaterial: 8620 SteelFinish: DLCColor: BlackPlatform: AR15/M16Upper Paddle Option: Rearward-Biased, Dimpled Features The Forward Controls Design...

Forward Controls Design Ar-15 Enhanced Magazine Release Button - Ar-15 Enhanced Magazine Release Button Dimpled Mil-Spec

The EMR-H features a slightly curved button surface to fit the natural curvature of your finger. The form fitting curve, along with horizontal serrations, create a self centering surface that inhibits the finger's vertical movements. The EMR-H has a...

Forward Controls PCM-L (Panel, Cable Management, MLOK, Long)

Pressure switches, like them or not, have their place on a fighting rifle.  If you do have one for your WML or IR target designator/illuminator, you have no doubt resorted to zip ties, rubber bands, or electrical tape to manage and route the cable...

Forward Controls 6310KM Compensator Keymo 5/8x24

Forward Controls Design 6310KM-L 1/2x28

6315KM-L (long) is the Dead Air sound suppressor Keymo mount of our 6315 (1/2×28) flash suppressor designed for 13.9″ barrels, compatible with .223 Dead Air sound suppressors with Keymo interface. 6315KM-L is 2.7″ long, and can bring a...

Forward Controls Design EPC OD green Twin Dimple

EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches. Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features they think many will find useful.   EPC has two "tabs"...

Forward Controls Design MCF-A Long

The Forward Controls Design MCF-A, is a MLOK rail cover machined in 6061 aluminum, with a all angles (dimpled) surface area that offers equal traction from all angles of approach. The AA pattern on the MCF-A is made of two dimple sizes and depths, a...

Forward Controls Design MCF-A Short

MCF-A is machined in 6061, with the AA surface (All Angles, or dimpled) pattern we developed for our bolt catch (ABC/R), forward assist (LDFA), ambidextrous magazine release (EMR-A).  The AA concept was not developed for aesthetics, but as a...

Forward Controls Design OPF-P365X, RMRCC

Forward Controls Design Optic Platform for Glock Mos - Aimpoint Acro Footprint for Glock Mos

Forward Controls Designs 6310KM-L (5/8 x 24) KeyMo Compensator

6310KM-L (long) is the Dead Air sound suppressor Keymo mount of our 6310 (5/8 x 24) flash suppressor designed for 13.9" barrels, compatible with .223 Dead Air sound suppressors with Keymo interface.  6310KM-L is 2.7" long, and can bring a 13.9"...

Forward Controls Designs 6315KM-L (1/2 x 28) KeyMo Compensator

6315KM-L (long) is the Dead Air sound suppressor Keymo mount of our 6315 (1/2x28) flash suppressor designed for 13.9" barrels, compatible with .223 Dead Air sound suppressors with Keymo interface.  6315KM-L is 2.7" long, and can bring a 13.9" barrel...