All of our Custom Machining is Done by DP Custom Works
If you don't see machining package that meets your needs, you can pick exactly what you want on here. This work is performed on customer supplied slides. Please include a work order with your shipment.
A BOB cut is a 45 Degree cut on the bottom front of your M&P 5" or Glock long slide model.
Top front and or window cutouts are windows cut into your slide on both sides and/or on top.
M&P slides require engraving removal for windows, ports, and serrations, and it is built in the price.
45 degree cut along the long side of your Glock slide also available for the front and rear.(Only for Glock)
Shallow face cuts in your slide, can be done on the sides and the top. (Only for Glock)
Ports can be angled, straight, or ramped, 3 to 5 ports per side (Please specify on your Work Order)
Top Serrations are cut in your slide. Serrations can be wavy or straight. You can choose between having the whole top done, or just the front or rear side. (Please specify on your Work Order)
Cocking serrations machined on the front of your slide, can be vertical or angled. You can have the factory engraving on a glock removed or outlined.
We must have your optic on hand during the cut.
Optic cut on M&P will require a new rear dovetail cut behind or in front of the optic if you wish to have a rear sight.
Deltapoint Pro, Burris Fastfire, Vortex Venom cuts must remove factory rear dovetail on Glocks.
Burris Fastfire, Vortex Venom and Viper cuts will use #6-32 screws instead of the #6-48 screws that come with the optic. We will provide new screws for the optics.
Trijicon RMR, Burris Fastfire, Vortex Venom & Viper will have recoil post milled into the cut. Deltapoint Pro will NOT have recoil post milled into the cut.
Trijicon RMR and Vortex Viper cut on a Glock can be done without removing the rear dovetail OR cut over factory rear dovetail and add a new dovetail in front of the optic.
Cerakote Finish is required for Machining through us, if you would like other options, please visit DP Custom Works at www.dpcustomworksllc.com